Double Glazed Window Repair
The majority of double-glazed windows come with a guarantee, and it's worth examining what it covers. It usually covers any problems with window hardware, like hinges and locking mechanisms in the first ten years.
Mist between the glass windows can be caused by a break in the seal, and it's something that needs to be repaired quickly to stop damp or mould from forming in your house.
Condensation Between the Windows
If condensation forms between windows in your home, it is an indicator that the seal securing the insulating gas between the panes has failed. This is a serious problem that needs to be addressed immediately, especially during the winter months when humidity levels are at their highest. It could also cause damage to sills or sealants and also cause mould.
Double-glazed windows should not have condensation between the panes. However, it is not uncommon for high humidity or an extremely cold snap to cause this issue. The issue can usually be resolved without the need to replace the entire window. A professional can drill small holes into the glass and spray the inside of the window with a special cleaning solution. The water is then sucked out of the window, and an anti-fogger system can be added to prevent any further buildup of moisture in the future.
Condensation may also occur between windows due to air leakage, or other causes outside the window. If this is the situation, it is likely to take longer for moisture to collect in the window, as the air will need to be sufficiently warm for the water molecules to vaporise. In these situations, it is better to replace double-glazed windows rather than trying to repair the sealed units.
A double-glazed glass window is composed of two or more pieces of tempered insulated glass, which are joined by a metal frame. The gap in the middle of the windows is filled with a non-toxic gas for insulation such as argon or krypton and then sealed. The seal is responsible for stopping the insulating gas from escaping and also prevents air and moisture from getting through the gap.
As windows age, the seals deteriorate and can allow moisture to enter the gap between the glass panes. When seals fail it is crucial to be aware of this since it means that the double glazing no longer performs the way it did in the past. This can result in poor energy efficiency, increased heating bills, damaged properties and the risk of condensation between the windows.
Mist
It is perfectly normal to see condensation on your windows. This indicates that your double glazing system is working correctly and is able to maintain the heat inside your home. The condensation happens because the air outside is warmer than the glass, and reaches the dew point of the window prior to the air inside. Double glazing of high quality is a fantastic method to achieve this.
If you notice condensation on the inside of the window, this could be an indication of an issue with ventilation in your home. This is because the extra moisture has nowhere to go and ends up on your windows as well as in carpets, on furniture and other areas within your home. It is possible to prevent this by having it examined by a professional and ensuring that there is enough fresh air in your home.
Another reason you could see mist on your double-glazed window is that the seal between the two panes has worn down. This could be due to wear and tear, or due to the use of chemical cleaning solutions. The best option is to get the windows fixed as soon as you can.
The professional repair of your windows will ensure that they are watertight and free from condensation, fogging and misting. It is also a lot cheaper than replacing them entirely and will also save you money on your energy costs.
A FENSA registered window installer can offer a price for repair or replacement of your double-glazed windows. If your windows are old and have been in use for a long time, you may want to consider upgrading them to new A-rated energy efficient windows.
It is a very good idea to keep copies of any warranties or agreements with your window fitting company. This will be very helpful if any problems with the windows arise in the future, and you then contact your installers to resolve these issues. This is a better alternative to simply not addressing the issue that will only get worse and could lead to other issues in your home.
Close or open with difficulty
It's not just a nuisance when double-glazed windows are hard to open or close. They can cause higher energy bills because of heat loss and draughts. It could also be security risks, particularly when the locks aren't working properly. It is important to repair double-glazed windows and doors as soon as possible.
If you're unable to open your windows and have tried the most basic of solutions like using a screwdriver to prise it open or tapping around the frame using a sharp object, the issue might be more serious. It could be that the window is sagging in its frame and needs to be set again or there is a gap between the glass panes as well as the frames. In either case, you should call in an experienced double glazing repair expert to make sure that the correct repairs are done and to prevent future problems.
It's not uncommon to find UPVC window handles and lock mechanisms to get stuck or difficult to operate, especially when they are worn and old. This is caused by the accumulation of dirt or grease within the handle. It can be cured by cleaning it with a uPVC cleaner. If this doesn't work, try tapping the uPVC using a screwdriver. Be careful not to scratch the handle or the window handle mechanism.
If this doesn't resolve the issue, then the window might need to be replaced, as it is likely that the hinges aren't longer in the correct position or the locking mechanisms are damaged. In this case you should seek out a professional UPVC window repair expert.
David The Window Wizard specialises in all technical aspects of double-glazed window and door repair including fixing a jammed or locked shut double glass window. He has vast experience the conversion of old window mechanisms into modern ones. This will often reduce the expense of replacing the entire window. For more information or to request an appointment for a free quote, contact us by phone or email today.
Warping
Double-glazed windows are a great way to save energy in your home. They consist of two separate panes that have a spacer, gas or air between the panes, creating a seal to keep cold air out and warm air in. In time, however, these windows may become damaged or broken and require repair. Fortunately, the majority of repairs are simple and can be accomplished without the expense of replacing the entire window.
Warping is a frequent issue with double-glazed windows. This happens when the windows begin to bend or twist, or bow. This can affect the structural integrity and insulation properties of the windows. upvc door repairs near me glazed windows should be installed correctly and maintained regularly to avoid this issue.
Contact a professional immediately if you notice that your double-glazed windows are warping. This will help to stop the problem from becoming worse. They will be able inspect your windows to determine the reason. They will make use of special tools to fix your problem and ensure that you windows are completely sealed.
Water vapour can cause this issue because it can accumulate between the windows over time. This can be caused by a variety of elements, such as the weather such as humidity levels, temperature and fluctuations. To fix this problem, the specialist will drill out a small hole to let the moisture out. The specialist will apply a cleaner on the glass to clean it, then apply a sealant.
If your windows aren't able to be closed or opened, it could be due to a broken mechanism or hinges. Before calling an expert to resolve the problem, it is worthwhile to grease the parts. This can often resolve the issue and decrease your need for replacements. However, if your windows are very old or are not providing the insulation you'd like to see, it is often better to replace them.